Tensile Testing Machine-Single Column


Tensile Testing Machine Single Column

Tensile testing, also known as tension testing, is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area.From these measurements the following properties can also be determined: Young’s modulus, Poisson’s ratio, yield strength, and strain-hardening characteristics. Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.

It is applicable in testing the rubber ,plastic film ,cable , fabric , paper ,aluminum board ,textile ,fabric and so on , It can do the test of tensile,compression elongation ratio test, hot seal strength, tearing strength, 180 degree peel (include T peel), and 90 degree peel ,etc .

Technical Parameter :

Load cell (N) : 50 , 100 ,200 ,500 ,1000 ,2000 ,5000

Type : Single Arm / column

Measurement range : from 2%-100% of the load cell capacity .

Strength Precision : 1% of applied value

Cross head Speed : 0.1mm/min – 500mm/min  Variable speed

The error of the distance : ≤1%

Resolution of the distance : 0.01mm

Valid Tensile Distance: 650mm (option)

Compression Space : 650mm

Strength Resolution : 1/100000

LCD Electronic Tensile Strength Tester or Computerized Tensile Strength Tester.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart